From US $43 / 500 PIECE (EXW)

Fiber Cement Board Cladding Clip

The Fiber Cement Board Cladding Clip is a concealed mechanical fixing component designed specifically for fiber cement facade panels. It is used with fiber cement boards featuring pre-formed edge grooves, allowing the panel to engage directly with the clip for a close and secure connection.

Unlike general-purpose cladding clips that require grooves to be machined into the panel during installation, this system is designed to match the factory-formed groove profile of the fiber cement board.

How the Fiber Cement Board Cladding Clip Works

The fiber cement panel is manufactured with a matching groove along its upper or lower edge.

The clip is fixed to a vertical metal subframe or supporting column using suitable screws. The raised hook section of the clip then engages with the groove in the fiber cement panel.

The matched groove-and-clip profile allows the panel to sit closely against the fixing component, helping achieve a small and consistent joint between adjacent panels when the system is properly designed and installed.

This type of concealed clip fixing is consistent with how fiber cement panel clip systems are specified in architectural facade assemblies.

Designed for Factory-Grooved Fiber Cement Panels

The key feature of this clip is its compatibility with the pre-formed panel groove.

The current configuration is designed for fiber cement boards with an approximately 6 mm groove. The clip hook engages with the groove to provide a concealed mechanical connection between the panel and vertical supporting structure.

Because the groove is formed during panel production, the clip does not require the same type of on-site groove machining used by products such as K-Type Cladding Clips.

Material and Standard Specification

This product is currently available in:

• Hot-Dip Galvanized Steel
• Thickness: 0.8 mm
• Overall size: 70 × 85 mm
• Suitable groove: 6 mm

The current product is a customized specification developed for a specific fiber cement board application.

Custom Manufacturing

Different materials, thicknesses, dimensions, hook profiles and groove configurations can be customized according to the fiber cement panel manufacturer’s requirements.

We can develop the clip based on an existing panel sample, groove drawing or approved technical dimensions.

Key Features

• Designed specifically for fiber cement board
• Concealed panel fixing
• Compatible with pre-formed panel grooves
• Close and stable panel engagement
• Fixed to vertical metal subframes or structural columns
• Current configuration for approximately 6 mm grooves
• Hot-dip galvanized steel
• Custom sizes and profiles available

Typical Applications

The Fiber Cement Board Cladding Clip is suitable for:

Panel systems installed on vertical metal subframespe Cladding Clips according to approved drawings or samples.

Fiber cement facade panels

Fiber cement board wall cladding

Exterior ventilated facade systems

Interior fiber cement wall panels