From US $103 / 2000 PIECE (EXW)

H-Type Grooved Tile Cladding Clip

The H-Type Grooved Tile Cladding Clip is a concealed mechanical safety fixing designed specifically for exterior wall tiles with a recessed edge groove. Its H-shaped profile engages with the groove along the edge of the tile, providing additional mechanical restraint against panel detachment while the tile is installed using conventional adhesive or mortar.

Unlike general-purpose cladding clips, this system is designed to match a specific grooved-edge tile profile, allowing the clip to engage with the tile along its edges.

How the H-Type Cladding Clip Works

Many exterior wall tiles are manufactured with a recessed section along the outer edge of the tile. The outermost part of the tile is slightly thinner, creating an integrated edge groove.

The H-Type Cladding Clip is designed to fit into this recessed profile.

Because the tile groove is formed along the edges, the clip can engage with the top, bottom or side edges of the tile, depending on the installation position.

The clip is installed together with conventional tile adhesive or cement mortar. Its primary function is not to replace the adhesive fixing, but to provide an additional mechanical safety connection that helps restrain the tile against detachment.

Mechanical Edge Engagement

The key feature of the H-Type Cladding Clip is its mechanical engagement with the recessed tile edge.

The H-shaped channel grips the corresponding edge groove of the tile, creating a mechanical connection between the clip and the panel.

This is different from adhesive-dependent safety clips where the inserted tab mainly relies on epoxy adhesive to remain attached to a straight or angled groove.

The H-Type design can engage directly with the factory-formed edge profile, providing additional mechanical retention while allowing the tile to remain primarily adhesive-installed.

Designed for Grooved Exterior Wall Tiles

This clip is particularly suitable for exterior wall tiles manufactured with a recessed edge profile.

The system allows the clip to be used around different sides of the tile because the recessed profile can be present along multiple edges.

This makes it possible to adapt the fixing arrangement to different panel layouts and installation positions.

The exact groove profile should be confirmed before production to ensure the H-Type clip engages correctly with the tile edge.

Groove Size Options

To accommodate different tile manufacturers and panel profiles, we provide three standard groove configurations:

• 6 mm
• 7 mm
• 8.5 mm

The appropriate clip should be selected according to the actual recessed profile of the tile.

Because different manufacturers may use different edge dimensions, customized groove engagement dimensions can also be developed according to tile samples or technical drawings.

Material, Hole and Color Options

The H-Type Cladding Clip is available in black and white, allowing it to better match different joint and grout colors.

The standard clip thickness is:

• Main body: 1.7 mm
• Groove engagement section: 1.8 mm

Two fixing-hole options are available:

• 6 mm fixing hole
• 8 mm fixing hole

This allows the clip to be matched with different mechanical fasteners according to the installation system.

Adhesive and Mechanical Safety Fixing

The H-Type Cladding Clip is used as a secondary mechanical safety fixing.

The tile is normally installed using adhesive or cement mortar in the conventional manner, while the clip provides additional mechanical restraint between the tile and the supporting structure.

This combination allows the adhesive to perform the primary bonding function while the clip adds an additional layer of mechanical protection.

For exterior applications, the overall fixing system should be designed according to the panel dimensions, weight, substrate, environmental conditions and project requirements.

Key Features

• H-type mechanical edge engagement
• Designed for grooved exterior wall tiles
• Additional mechanical safety fixing
• Compatible with conventional tile adhesive or cement mortar
• Three groove options: 6 / 7 / 8.5 mm
• 1.7 mm main body thickness
• 1.8 mm groove engagement section
• 6 mm and 8 mm fixing-hole options
• Black and white color options
• Custom groove profiles available

Typical Applications

The H-Type Grooved Tile Cladding Clip is suitable for:

• Exterior ceramic wall tiles
• Grooved facade tiles
• Architectural tile cladding
• Exterior wall cladding systems
• Adhesive-installed tile facades requiring additional mechanical restraint

H-shaped panel holders are also used internationally in facade systems to mechanically engage the edges or folds of facade panels and transfer loads to the supporting substructure.