Z Anchor
Stone Cladding Bracket
Customized products
Stainless Steel Z Anchor Stone Cladding Bracket
The Stainless Steel Z Anchor Stone Cladding Bracket is a traditional mechanical fixing solution for natural stone facade installation. Its Z-shaped support structure works with an adjustable threaded arm and stone fixing pin to connect the stone panel to the wall or supporting structure.
The system can be used at horizontal or vertical stone joints and allows adjustment of the bracket position during installation. It is suitable for granite, marble, limestone and other natural stone facade panels.
Weiqiang supplies Z Anchor brackets as a customized product. Bracket thickness, width, projection, adjustable arm length, thread size, pin diameter and fixing hole dimensions can be produced according to project drawings and installation requirements.
Z anchors are commonly used for natural stone installation and are available in configurations for horizontal and vertical joints. Typical commercial systems use projection ranges roughly from 45 mm to 135 mm, although actual project dimensions should be selected according to panel weight, cavity depth and structural design.
Material
Stainless Steel: SS304 / SS316
Other materials or grades: Available according to project requirements
| Item | Typical Reference |
|---|---|
| Bracket Thickness | 3 mm / 4 mm / 5 mm |
| Bracket Width | 30 mm / 40 mm |
| Projection / Offset | 45–135 mm |
| Adjustable Arm Thread | M10 / M12 |
| Stone Fixing Pin | Ø5 mm |
| Adjustable Arm Length | 60 / 70 / 90 mm |
| Wall Anchor | M8 / M10, according to system design |
| Material | SS304 / SS316 |
| Custom Sizes | Available |
Dimensions shown above are typical references only. Final bracket dimensions are customized according to stone thickness, cavity depth, panel weight, substrate condition and project requirements.
Key Features
- Mechanical fixing solution for natural stone facade panels
- Z-shaped bracket structure with adjustable fixing arm
- Suitable for horizontal or vertical stone joint installation
- Adjustable projection and positioning according to project requirements
- Available in stainless steel 304 and 316
- Suitable for granite, marble, limestone and other natural stone
- Customized dimensions available according to drawings or samples
- Can be supplied with compatible pins, bolts, nuts, washers and wall anchors
Typical Applications
Natural Stone Facades
Granite, marble, limestone and other architectural stone panels.Dry Cladding Systems
Used as part of mechanically fixed stone facade systems where the stone panel is connected to the supporting wall or structure through a pin-type fixing arrangement.Projects Requiring Adjustable Projection
Different bracket projections and adjustable arm lengths can be produced to suit various cavity depths and facade installation conditions.
Installation Overview
The Z Anchor bracket is fixed to the concrete wall or supporting structure using a suitable mechanical anchor. The threaded adjusting arm is positioned through the bracket and adjusted according to the required facade projection.
A stainless steel pin connects the fixing arm to the prepared hole in the stone panel edge. The bracket position and panel level are adjusted before the nuts are tightened and the fixing is secured.
Final anchor type, pin position, bracket dimensions and installation spacing should be determined according to the project design, stone panel size, panel weight and substrate conditions.
Request a Quote
All products are available in stock in various specifications, with custom production also available.
